Product Care
Details deserve care
Beautiful hardware brings the finishing touch to a space. A little regular care helps preserve the appearance and performance of your cabinet knobs, pulls, and decorative hardware.
Please read carefully this simple guide to keeping your finer touch looking their best.
Routine cleaning
Wipe hardware regularly with a soft, fresh/unused cloth (paper towel), slightly damp cloth to remove fingerprints, dust, and everyday residue.
For a more thorough clean, use a small amount of mild dish soap diluted in warm water. Gently wipe the surface, then dry immediately with a clean microfiber cloth to help prevent water spots and streaks.
Products to avoid
Avoid bleach, ammonia-based sprays, window cleaners, degreasers, solvents, and other harsh chemical cleaners.
Never use steel wool, abrasive sponges, scouring pads, or polishing compounds unless the manufacturer specifically recommends them. These products may scratch, discolour, or damage the finish.
Handling and usage
Open drawers and cabinet doors with smooth, controlled movements. Pull straight outward where possible instead of twisting or pulling at an angle.
Do not hang heavy bags, towels, or equipment from knobs and pulls. Excessive weight or force may loosen mounting hardware or damage the finish over time.
The hidden enemies of your hardware
Small details that can leave a lasting mark
Even the most beautiful hardware has hidden enemies—ones you may not notice during everyday use.
Rings, especially those featuring diamonds or other hard gemstones, watches, bracelets, and other jewelry can silently scratch or wear down the delicate finishes of your cabinet knobs and pulls.
Over time, repeated contact can leave tiny marks that gradually affect the beauty of your hardware.
A Gentle Reminder: Be mindful of the jewelry and accessories you wear when opening drawers and cabinets. A little extra care goes a long way toward preserving the elegance of your hardware.
Enjoy every touch. Preserve every detail.
Installation and longevity
Install hardware according to the instructions and measurements provided with your specific product. Check alignment carefully before drilling, and use the drill-bit size specified by the manufacturer.
Periodically inspect mounting screws and gently retighten them as needed. Avoid overtightening, which can damage hardware or cabinet surfaces.
Finish and warranty care
Care requirements can vary by material, finish, and manufacturer. Always follow any product-specific instructions first. Damage caused by abrasive cleaning, chemical exposure, improper installation, or misuse may not be covered under the applicable manufacturer's warranty. Warranty terms vary by brand and product.